Search Engine

Here you can search through the pages of this Namespace, their attachments and the files uploaded to the system.
Note: the results will only display the items you have permissions to read.



Filter by Category

Select allNoneInvert




This search, performed through 1.77 MB (86 documents, 4125 words), completed in 0.0 seconds and yielded 20 results.

How To: Google Earth (KML) — 16.7%

[...] including authentication Latest Positions: https://{Domain}/KML/LatestPositions?username=(username)&password=(password) Historical Positions: https://{Domain}/KML/PositionHistory?username=(username)&password=(password)&fromDate=(from)&toDate=(to) Emergency Historical Positions: https://{Domain}/KML/EmergencyHistory?username=(username)&password=(password)&fromDate=(from)&toDate=(to) Geofences: https://{Domain}/KML/Geofences?username=(username)&

ClearWatch 250 — 15.2%

[...] later) header (byte): 0 <payload> authentication code (10 bytes): HMAC-SHA256-80(<password>,<payload>) Where an HMAC-SHA256 is computed over the (header byte not included) using a password/key shared by the device and server, and is truncated to the first 10 bytes (80-bits). Passwords can be set on the on the unit using the Lua commands: -- set custom password, up to 32 bytes (interface 2) core.setpassword("<password>") -- [...]

GSatMicro — 15.2%

[...] later) header (byte): 0 <payload> authentication code (10 bytes): HMAC-SHA256-80(<password>,<payload>) Where an HMAC-SHA256 is computed over the (header byte not included) using a password/key shared by the device and server, and is truncated to the first 10 bytes (80-bits). Passwords can be set on the on the unit using the Lua commands: -- set custom password, up to 32 bytes (interface 2) core.setpassword("<password>") -- [...]

Queclink — 9.1%

[...] the proper reception before sending the command to the unit. Setup APN and server address: AT+GTQSS={password},{APN},[APN Username},{APN Password},4,,0,66.165.183.84,4753,192.0.0.0,0,,0,0,,,FFFF$ Setup reports every 180 seconds: AT+GTFRI={password},1,0,,,0000,2359,180,180,180,180,1F,1000,1000,0,7,50,5,,,FFFF$ [...]

NAL Shout Nano — 7.6%

[...] ) 3) Options > View Address Book > Login > It will require your tracking portal login username and password to authenticate. 4) Options > View Canned Messages > Login > It will require your tracking portal login username and password to authenticate. Note that when synchronizing your Address Book Entries, only the Short Code, Name and Location fields will appear on your device's interface. This is a limitation of the Shout synchronization interface. Messaging to those address book entries will still work, however, because the server translates [...]

Calamp — 6.1%

[...] 769,0,4763 AT$APP GPRS CONTEXT 0 "{APN}" AT$APP PARAM 2314,0,"{APN Username}" AT$APP PARAM 2315,0,"{APN Password}" AT$APP GPRS CONTEXT 1 "{APN}" AT$APP PARAM 2314,1,"{APN Username}" AT$APP PARAM 2315,1,"{APN Password}" AT$APP PARAM 1024,35,255,1 AT$APP PEG ACTION 70 0 The unit will now reboot. Once the terminal is restarted, enter the following command to force an immediate connection: AT$APP PEG ACTION 49 129 The unit will now download the script from the central repository and begin reporting. This can take up to 30 minutes in poor network [...]

OpenPort — 4.5%

[...] optimizer Open a browser and navigate to http://192.168.10.1 Login to the router using username: admin and password: webxaccess Navigate to System->Tracking Enable tracking with OpenPort Set the tracking interval Each tracking report consumes 25 bytes of data which is very little over over this satellite system. Tracking will not impact your airtime costs in any significant way. Optimizer Firmware Upgrade While connected to the internet download and store on your computer the following file http://www.globalmarinenet.com/downloads/wxa/wxa-100 WiFi connect to the Optimizer [...]

Oner — 4.5%

[...] The OCT600 can be setup to report to the portal using the following SMS commands (note the default password of 000000 is used in the examples below): ID{SIM #}#000000 - SIM # is the local SIM card number without local and international code APN;{APN}#000000 IP;66.165.183.84;4786#000000 TCP1#000000 TIMEXXXXX#000000 where XXXXX is the reporting interval desired in increments of 10 seconds. For a reporting interval of 5 minutes you would use TIME00030#000000 DISXXX#000000 where XXX is the distance reporting interval desired in meters. Use 0 to disable distance reporting. [...]

Kingneed — 3.0%

[...] T8800 can be configured to report via the following SMS commands: APN: If there is a username and password required: *apn*{APN}*{APNUsername}*{APNPassword} If only a username is required: *apn*{APN}*{APNUsername}* If neither a username or password [...]

Thrane FleetBroadband — 1.5%

[...] “Settings” Click on “LAN” Click on “Network User Groups” Enter the following: Username: admin Password: 1234 Press “Login” Step 2: Configure [...]

SkyWave — 1.5%

[...] following command prop set save 29 2 {APN} prop set save 29 3 {APN Username} prop set save 29 4 {APN Password} prop set save 29 50 {Domain} prop set save [...]

Pointer — 1.5%

[...] and Configuration > Communication settings > GPRS Settings > Operational Server Support > GPRS PPP password (set based on your SIM)

How To: Embedded View - URL Parameters — 1.5%

[...] https://{Domain}/Track?defaultMapType=road&enableLayers=iridium,radar Anonymous Users Anonymous users are those who do not require a password to view their assigned assets. The short-cut [...]

Keson — 1.5%

[...] The KS168 can be configured to report to the server via the following SMS commands (note the default password of 123456 is used): begin123456 apn123456 [...]

IsatData Pro (IDP) — 1.5%

[...] Active/Deactive/Move/Transfer Mobile rights for new contact vapp@gsattrack.com. The relevant Access ID and Password for the created Gateway will be supplied that [...]

How To: Login — 1.5%

1.) Enter User Name 2.) Enter your password and click on the "Login" button [...]

Automated Flight Following (AFF) — 1.5%

[...] slash (/) is REQUIRED. Authentication is done via Basic Authentication using your tracking Username/Password. The API is a POX (Plain Old XML) format and [...]

Addvalue Fleet Broadband Devices — 1.5%

[...] http://192.168.1.35 on the same network as your FleetBroadband Enter the following: Username: admin Password: satlink Configure Settings At the home screen, [...]

MCG-101 — 1.5%

[...] firmware Connect via WiFi or Ethernet and browse to http://192.168.10.1 and enter username superadmin, password webxaccess. Go to System > Firmware > uncheck [...]

Wideye iFleetONE — 1.5%

Go to the Web MMI login page of the terminal. Enter the following codes in the password field: fNu8S4BK4DryhRTy Press the login [...]